| Basic Modular F6 Spacer Bender Specifications |
| Minimum Frame Size: |
2 1/2” x 9” (63mm x 228mm) inside dimensions |
| Maximum Frame Size: |
Virtually unlimited; depends on spacer stock length and size of support table |
| Maximum Bend Angle: |
160° with the shapes option (90° only on Basic F6) |
| Minimum Cut Length: |
10 1/2” (266mm) |
| Space Requirement: |
Standard support table and optional spacer material rack requires a space area 3’-2” deep x 10’-2” high x 26’ long (965mm x 3099mm x 7925mm) |
| Crated Weight: |
Approx. 1600 lbs. (726kg) |
| Standard Color: |
Circuit Blue |
| Electrical Requirements: |
10 amps @ 120V AC, 60 Hz, single phase |
| Pneumatic Requirements: |
80 psi @ 25 cfm; minimum recommended supply line 1/2” (13mm) diameter |
| Orders & Quotations: |
Formal quotations upon request; contact us for delivery and warranty information |
DS-100 Desiccant Filler Specifications |
| Size: |
56” wide x 48” deep x 69” high (1422mm x 1219mm x 1753mm) |
| Crated Weight: |
Approx. 220 lbs. (100kg) |
| Color: |
Circuit Blue |
| Electrical Requirements: |
120V AC, 60 Hz |
| Pneumatic Requirements: |
80 psi shop air |
